Skip to content

Solutions

The problem on your line, and how it gets solved.

Troubleshooting, pre-formulation and problem resolving: the patterns we see most often, and the approach that resolves each.

Troubleshooting

Something is going wrong on the line.

Manufacturing problems, and the change that fixes each one.

  1. Problem 01

    Tablets disintegrate or dissolve too slowly

    Solution

    Review the disintegrant type and level first: a super-disintegrant such as croscarmellose sodium is effective at low levels. Then check binder strength and lubricant blend time, since over-binding and over-lubrication both slow release.

  2. Problem 02

    Capping and lamination during compression

    Solution

    Usually a compaction problem, not a compression-force problem. A co-processed excipient such as silicified MCC improves compactibility, and controlling moisture and pre-compression helps the tablet bond before ejection.

  3. Problem 03

    Powder sticks to punches or flows poorly into the die or capsule filler

    Solution

    Add or optimise a glidant such as colloidal silicon dioxide, and check lubricant level. If the blend is inherently cohesive, a direct-compression granule removes the flow problem at its source.

  4. Problem 04

    Content uniformity fails for a low-dose ingredient

    Solution

    Pre-blend the ingredient by geometric dilution, match its particle size to the diluent, and avoid segregation-prone blends. A ready-made premix moves this control upstream of your line.

Pre-formulation

Decide before the first batch.

Choosing the dosage form and checking compatibility early avoids most later problems.

  1. Problem 05

    You are not sure which dosage form suits an ingredient

    Solution

    Start from the ingredient: its solubility, stability, dose and taste. Fat-soluble ingredients suit soft gelatin, sensitive ones suit encapsulated beadlets or pellets, and an ingredient that is easier to take may suit a gummy or an effervescent tablet.

  2. Problem 06

    Poor and variable absorption of a poorly soluble ingredient

    Solution

    Work through the absorption chain: improve dissolution with micronization, keep the ingredient dispersed with emulsification or a suitable carrier, and consider encapsulation. The right lever depends on whether solubility or permeability is the limit.

  3. Problem 07

    An ingredient and an excipient may not be compatible

    Solution

    Screen binary and ternary combinations under heat and humidity before the first batch, so an incompatibility shows up on the bench and not on stability.

Problem resolving

A finished product has a problem.

Taste, stability and absorption problems in a product that is already made.

  1. Problem 08

    Bitter taste in chewable, dispersible or liquid products

    Solution

    Taste-masked granules or coated beadlets keep the ingredient out of contact with taste receptors. A gummy or an effervescent tablet with masking sweeteners can also make an ingredient easier to take.

  2. Problem 09

    Moisture-sensitive ingredient loses potency on stability

    Solution

    Select low-hygroscopicity excipients, add a moisture scavenger such as colloidal silicon dioxide, apply a moisture-barrier film coat, and confirm the pack (often the decisive factor) is matched to the product.

  3. Problem 10

    An acid-sensitive ingredient loses activity in the stomach

    Solution

    Use a delayed-release (enteric) dosage form. Coated pellets or beadlets are often better than a coated tablet because multi-particulate transit is more even and one coating defect does not compromise the whole dose.

Have a problem that is not on the list?

Describe what you are seeing. Most issues have a formulation answer.

Contact us